MicroTouch ClearTek II Capacitive Touch System

The Global Standard in Surface Capacitive Touch Technology

   
MicroTouch ClearTek II Capacitive Touch System


3M MicroTouch Cleartek II Touch Screen System Prices


Data Sheet (PDF 176 KB)
   

Performance

  • Input Method: Finger input
  • Accuracy*: Reported touch coordinates are within 1.0% of true position (based on the diagonal dimension of the screen) within the precision area when linearized and used with MicroTouch™ EX II Series Touch Controllers
  • Resolution: Touch screen resolution defaults to settings in the electronics and software, generally 1024 x 1024, but capable of 16K x16K when used with EX II electronics
  • Linearization: Factory linearization values are stored in the attached controller, represented in a 2D bar code, or in the touch screen NOVRAM when present

Optics

  • Light Transmission**: 91.5% light transmission (±1.5%)
  • Surface Finish: ClearTek II hard coat with optimal anti-glare properties. Scratch resistant top coat provides smooth, easy glide touch surface
Features
  • Fast, accurate and reliable touch response
  • 3M-proprietary hard coat provides premium surface wear resistance for heavy-use applications
  • Operation is unaffected by on-screen contaminants
  • Resilient top coat creates a scratch-resistant, easy-glide surface
  • Excellent light transmission of 91.5% provides vibrant optical characteristics with optimal anti-glare properties
  • Solder less, low-profile design and robust tail simplifies integrations and improves sealability.

Mechanical

  • Minimum Contact Requirement: 5.4 ms for finger input with EX II series controller
  • Glass Thickness: 3.18mm (±0.25mm) typical. (Glass only, not including flexible tail connection; reference touch screen drawing for details.)
  • Display Size Supported: 6.4" to 32" diagonal (4.3, 16:9, 16:10)
  • Surface Scratch Hardness: A Mohs pick with a hardness rating of 7 or higher is required to induce a scratch which will cause a functional failure. Functionality unaffected by severe abrasion per MIL-C-675-C, exceeding number of specified cycles. Functionality unaffected by 10,500 grams of force per Balance Beam Scrape Adhesion Mar Tester with loop stylus
  • NEMA Rating: NEMA sealable
  • Gasketing: Complete water-resistant seal obtainable with polyethylene gasket. Please consult ClearTek™ II integration guide for further details
  • Mounting: Please consult MicroTouch™ ClearTek™ II Integration Guide for specific mounting instructions.
  • Cleaning: Water, isopropyl alcohol, or similar non-abrasive cleaners

Reliability

  • Surface Obstructions: Touch screens operation withstands surface contaminants such as, dirt, dust and grease
  • Chemical Resistance: ClearTek™ II is highly resistant to a variety of solvents, acids, and household chemicals in accordance with ASTM-D-1308-02e1 and ASTM-F-1598-95 (reapproved 2002)
  • Liquid Resistance: Liquids on screen do not impede touch screen performance
  • Operating Temperature: -40° C to 70° C for the touch screen
  • Storage Temperature: Always store the touch screen in its original shipping container between -50°C and 85°C (up to 90% RH from 0° C to + 35° C). Never store touch screens in an environment where condensation may form
  • Humidity: Up to 90% RH from 0° C to +35° C, non-condensing
 



 

 435-673-5455
 800-753-2441
 828-835-3322 Bryan NC
 770-921-8494 Fax

  Copyright © 2016

TouchWindow.com
Touch Screens Inc.
445 N. 1660 West Circle
St. George, Utah 84770 USA
Touch Screen, Elo Touch Screen, 3M Touch Screens, Industrial Touch Display Monitors
Home        Contact Us        Support        Site Map

 

                Secure Site